How to lift motorcycle with regular jacks?
If you have decided that you'd like to do maintenance on your motorcycle by your own. However, if your bike doesn't have a center stand, you have no choice but to hoist it on a motorcycle jack stand (also sometimes called a lift) in order to work on it. If you're working on the front wheel, you'll want to jack your bike up regardless of whether or not you've got a center stand. With a little guidance and the proper tools, you'll be wrenching away on your bike in no time.
You should use your bike's shop manual to help you identify the best and most supportive places from which to lift your bike using a jack. Cruiser owners have the advantage of frame rails. These will make hoisting it up with a jack and mounting it on jack stands for work much easier. Sport bike owner should look for your frame sliders.
If your bike has a center stand, use it. This will help to position your bike so that jacking it up will go as smoothly as possible. Move to Step 4 if this is the case.
If you bike have a side stand, use a spare block of wood or something similar underneath the side stand before putting it down. You want your bike to be standing and supported as straight and upright as possible when mounting the jack underneath. From the rear, help them to guide the bike to an upright position, making sure your friend grips the front brake lever tightly. Once the bike is straight up in the air and it and your friend are balanced securely, proceed to Step 4.
Make sure your motorcycle's jack stands are nearby and ready to use.
Carefully place your jack in the place you've determined is best to lift your particular bike. Lift slowly and evenly, and don't be afraid to lower it and start again if you feel unsure at any point. It's better to take your time and do it right than to dump your bike onto your garage floor or hurt yourself.
Once you've got the bike properly and securely jacked up, follow the directions on your motorcycle's jack stands for mounting them underneath the bike
Who sells small motorcycle jacks
The Best Motorcycle Lift
- Powerzone 380047 Hydraulic Motorcycle Jack. ...
- Extreme Max 5001.5044 Wide Motorcycle Scissor Jack. ...
- Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift Jack. ...
- OrionMotorTech Dilated Scissor Lift Jack. ...
- Dragway Tools 1100 LB Motorcycle Center Scissor Lift Jack. ...
- OTC 1545 Motorcycle Lift.
How to put motorcycle on jacks
Motorcycle jack or lift is a special support structure with a hydraulic jack which is used to lift a motorcycle. This will be available in auto repair shop. Before using the jack you need to have wood block to make sure that the bike does not roll off the jack stand.
At first make sure , the jack needs to be set on a flat floor, preferably concrete. It is recommended that not to place on carpet. To raise the motorcycle you need to put the jack in the down position near the block you used in the place.
You need to turn on hydraulic valve to be able to jack up motocycle , until it reaches where you want it to be. Before take out the jack you need to release the hydraulic valve to lower the motorcycle and then take out the jack.